Synology RS2414+ Guía de instalación descargar pdf (Pagina 15)

Chapter

Chapter 3: Install DSM on RackStation

After hardware setup is finished, please install DiskStation Manager (DSM) – a browser-based operating system

specifically designed for Synology NAS.

We highly recommend using Synology’s Web Assistant to install DSM with a web browser. Synology Web

Assistant can automatically download the latest software from the Internet and guide you through installation.

Install DSM with Web Assistant

Your RackStation comes with a built-in tool called Web Assistant to help you configure and install DSM. To use

Web Assistant, please follow the steps below.

1 Power on the RackStation.

2 Open a web browser on a computer in the same network as the RackStation.

3 Depending on your network environment, do either of the following:

a If you have Internet access, go to find.synology.com.

b If you do not have Internet access, go to rackstation:5000 and follow the onscreen instructions.

4 Web Assistant will be launched in your web browser. It will search and find your RackStation within the local

network. The status of your RackStation should be Not Installed.

5 Click Connect to start the setup process. Follow the onscreen instructions to complete the setup process.

Note:

1. Suggested browsers: Chrome, Firefox.

2. Both the RackStation and the computer should be in the same local network.

3. Internet connection must be available during DSM installation with Web Assistant.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Sin comentarios

Synology RS2414+ Guía de instalación Pagina 15