Synology DS414j Guía de instalación descargar pdf (Pagina 7)

7 Chapter 2: Hardware Setup

3 Load drives in the drive trays.

 For 3.5” drives: Place the drive in the drive tray. Then tighten the screws to secure the drive in place.

 For 2.5” drives: Place the drive in the blue area (shown below) of the drive tray. Turn the tray upside down

and tighten the screws to secure the drive in place.

4 Insert the loaded drive tray into the empty hard drive bay.

Important: Make sure the drive tray is completely inserted. Otherwise, the drive might not function properly.

5 Repeat the steps above to install all prepared drives.

1 2 3 4 5 6 7 8 9 10 11 12 ... 17 18

Sin comentarios

Synology DS414j Guía de instalación Pagina 7